Click to find the right part and diagnostics for your dock
24 hr dispatchsecure safe paymentscustomer feedback

Repairs


All Spares


New Products

SoundDock Original

Invebo |  SoundDock Original

Innexxis BC20 NFC Bluetooth 5.0 Upgrade Kit

Innexxis BC20 NFC Bluetooth 5.0 Upgrade Kit

Price: 49.00

In Stock | Allow 3 Days For Delivery

Colour

This easy to install kit is compatible with all Bose SoundDock Series 1 Docks. The BC20 delivers certified Bluetooth 5.0 sound quality streaming from any Bluetooth enabled smart phone, tablet or PC.
  • See BC20 Installation Video
  • See BC20 Features Video


  • Features
    • Fully Compliant Bluetooth 5.0
    • NFC Touch Pairing
    • Multi Band Dynamic Range Compression
    • USB Fast Charge Type A Socket
    • 3.5mm Stereo Line input socket (AUX in)
    • Pause/play, Skip formward, Skip back Buttons
    • Colour mathced Fascia Available in Black and White
    • Engineered to work welll with Amazon Echo


    Kit comprises:
    • BC20 Main Board
    • NFC Sensor and Control Panel
    • T8 Torx Screwdriver
    • Instructions

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



innexxis BC7A (2019) Bluetooth 5.0 and 30-Pin USB Charge Upgrade Kit

innexxis BC7A (2019) Bluetooth 5.0 and 30-Pin USB Charge Upgrade Kit

Price: 49.00

In Stock | Ships December 17th
This kit is UNIVERSAL AND FITS ALL SOUNDDOCK ORIGINAL SERIES 1. It gives your dock the ability to stream the highest quality audio from any Bluetooth enabled smart phone, tablet or PC. The charge upgrade feature is also compatible with all Apple devices that require USB charging (30 pin connector) including the Iphone, Ipod Touch and later generations of Ipod. This is a direct replacement that fits any Bose SoundDock Original Series 1. The upgrade can be completed in about five minutes. The supported foam overlay replaces the sticky overlay and holds the docking board in place. No adhesives are required. Note you also get a new docking connector. Please have your dock serial number ready to enter during checkout. Click here to see installation video
Kit comprises:
  • innexis-BC19 Bluetooth 5.0 Upgrade Board with new dock connector & USB charging support
  • Torx Screwdriver
  • Supported Foam Overlay (Non cradle version only)
  • Instructions

    People who bought this item also bought:
    1. SoundDock Series 1 Sound Processor Repair Service

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



USB Charge Upgrade and Dock Connector Replacement Kit for SoundDock Original

USB Charge Upgrade and Dock Connector Replacement Kit for SoundDock Original

Price: 39.00

In Stock | Allow 3 Days For Delivery
If your SoundDock original does not charge your Apple device then this kit will give your dock the features to enable you to play and charge all generations of Apple devices that require USB charging (30-pin docking connector) including the Iphones, Ipod and Touch. PLEASE NOTE: This part is not compatible with Type B Docks. This is a direct replacement for Bose part number #282490-001 & 276993-001 and will enable you to complete the upgrade in about five minutes. SoundDock Original Check & Diagnostic video The supported foam overlay replaces the sticky overlay and holds the docking board in place. Therefore no adhesives are required. Note you also get a new docking connector. Click on the gold bar above to check your dock type. Click to see replacement procedure video
Kit comprises:
  • Docking Board with new dock connector & USB charging support
  • T8 Torx Screwdriver
  • Supported Foam Overlay
  • Instructions.

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



SoundDock Original Dock Connector Type A

SoundDock Original Dock Connector Type A

Price: 33.00

In Stock | Allow 3 Days For Delivery
If your dock board looks exactly like this then you need type A. This is a direct replacement for Bose part number #282490-001 & 276993-001. Note that for a little more expense this type of dock can be upgraded to charge the Iphone and Ipod touch. Check items for sale under the Upgrade Kits. Click on the gold bar above to check your dock type and receive the resources by email. Refund guaranteed if returned within 14 days.


Related products:
1. Supported Foam Overlay
2. Dock Opening Tool

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



SoundDock Original Dock Connector Type B

SoundDock Original Dock Connector Type B

Price: 33.00

In Stock | Allow 3 Days For Delivery
If your dock board looks exactly like this then you need type B. This is a direct replacement for Bose part number 314877-001 & 314877-002 & 324206-0010. Note that this type of dock already supports the charging of the Iphone and Ipod touch. If your board has the four resistors then you do not need an upgrade kit! Click on the gold bar above to check your dock type and receive the resources by email. Refund guaranteed if returned within 14 days.

People who bought this item also bought:
1. Dock Opening Tool
2. Supported Foam Overlay


Related products:
1. Supported Foam Overlay
2. Dock Opening Tool

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Cradle Support Upgrade White

Cradle Support Upgrade White

Price: 10.00

In Stock | Allow 3 Days For Delivery
Fits SoundDock Original series 1 only. The Universal Cradle Upgrade supports the docked Apple device and protects the dock connector. When your finger presses on the front of the docked device there is no support behind so it moves backwards causing strain and wear to the docking connector. The docking connector is presented higher increasing penetration improving successful docking of iPhones with a protective case fitted. The upgrade simple to fit. See the video in the technical guide section or in the Video Guides tab below. Kit includes plastic parts, three silicone pads. A dock opening tool is required.

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Cradle Support Upgrade Black

Cradle Support Upgrade Black

Price: 10.00

In Stock | Allow 3 Days For Delivery
Fits SoundDock Original series 1 only. The Universal Cradle Upgrade supports the docked Apple device and protects the dock connector. When your finger presses on the front of the docked device there is no support behind so it moves backwards causing strain and wear to the docking connector. The docking connector is presented higher increasing penetration improving successful docking of iPhones with a protective case fitted. The upgrade simple to fit. See the video in the technical guide section or in the Video Guides tab below. Kit includes plastic parts, three silicone pads. A dock opening tool is required.

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Lightning to 30-pin Converter Cradle Support Sounddock Original

Lightning to 30-pin Converter Cradle Support Sounddock Original

Price: 14.50

In Stock | Allow 3 Days For Delivery
This cradle support molding fits the standard Apple 30-pin to Lightning adaptor (MD823ZM/A) . The kit consists of the Invebo Thunder support plus a special adaptor that fits the SoundDock Original Series 1. The support holds the adaptor in place and protects the dock, the adaptor and most importantly, your Apple devices. Compatible with all Apple hand-held devices with lightning connector. Please note: The cradle is only available in black and is NOT supplied with a 30-pin to lightning adaptor. These are easily sourced elsewhere. All Apple and generic charg only adaptors fitin the cradle. If you want to stream audio via the Lightning connector then you need the genuine Apple version part no MD823AM/A Supplied with 3 silicone pads to suit all Apple devices Compatible with all 20mm high charging converters Fits all SoundDock Original Series I Rugged Polycarbonate plastic 30-pin to Lightning NOT included


People who bought this item also bought:
1. Dock Opening Tool
2. Supported Foam Overlay

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Dock Opening Tool

Dock Opening Tool

Price: 1.85

In Stock | Allow 3 Days For Delivery
This is a small Torx screwdriver to fit the screws that hold the docking connector in place. A quality tool. 135mm Long.

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Supported Foam Overlay

Supported Foam Overlay

Price: 1.99

In Stock | Allow 3 Days For Delivery
The supported foam overlay is gloss on the top side and matt black soft padded-sealed cell foam on the underside. When assembled it protects and supports the docking connector board. It simplifies the replacement procedure because adhesive is not required to carry out the connector repair and if there are any problems the dock can easily be disassembled.

People who bought this item also bought:
1. Dock Opening Tool
2. Lightning to 30-pin Converter Cradle Support Sounddock Original

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Invebo |  SoundDock Original


 

invebo bose repair homepageInvebo fix bose sounddockInvebo Bose repairInvebo Bose sounddock boards