Click to find the right part and diagnostics for your dock
24 hr dispatchsecure safe paymentscustomer feedback

Repairs


All Spares


New Products

SoundDock Series II

Invebo |  SoundDock Series II

SD25HD High Definition Bluetooth Upgrade Kit

SD25HD High Definition Bluetooth Upgrade Kit

Price: $54.00

In Stock | Allow 10 to 14 Days delivery
This easily to install kit is integrated into the iPod cradle feature of the Bose SoundDock Series II., Installation instructions can be found in the Tech Guide section of this site, The streaming sound quality surpasses anything you've experienced with your SoundDock II. This upgrade incorporates the cutting-edge Qualcomm 5.1 Chipset, supporting the latest advanced audio codecs such as aptX, aptX HD, aptX Low Latency, SBC, and AAC. The connection to the dock is entirely digital, delivering the utmost clarity and depth achievable only through a 24-bit 48kHz bitrate.
Kit Comprises:
  • 1 x SD25HD Bluetooth Upgrade with integrated Touch control panel
  • 1 x Lower interface board
  • 1 x Interconnetion Ribbon Cable

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



SoundDock Series II Sound Processor Module Fixed Price Repair

SoundDock Series II Sound Processor Module Fixed Price Repair

Price: $64.95

In Stock | Shipping instructions will be emailed when you Order
If the controller in you Bose Sounddock Series II is faulty then we can fix it for you. The repair is usually shipped back to you three days of receipt. If your processor has liquid dmage or burnt parts we need to run a couple of visual checks before you send it to us. APPLIESS TO ALL SOUNDDOCK SERIES II Models

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Innexxis SD20 Bluetooth & Charge Upgrade Kit

Innexxis SD20 Bluetooth & Charge Upgrade Kit

Price: $64.95

In Stock | Allow 10 to 14 Days delivery
This kit FITS ALL SOUNDDOCK SERIES 2. It gives your dock the ability to to stream high quality audio over BlueTooth from any BlueTooth enabled smart phone, tablet or PC. Click to see installation procedure video This is a direct replacement that fits any Bose SoundDock Original Series 2. The upgrade can be completed in about five minutes. No adhesives are required. Note you also get a new docking connector. Please have your dock serial number ready to enter during checkout.
Kit comprises:
  • innexis-SD20 Bluetooth Upgrade Board with new dock connector & USB charging support
  • Torx Screwdriver
  • Plastic base support moulding
  • Instructions

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



SoundDock Series II Kit

SoundDock Series II Kit

Price: $44.95

In Stock | Allow 10 to 14 Days delivery
This is a replacement board for all Bose SoundDock Series 2 docks. This issue 5 board upgrades the previous issues so that your dock will detect and play all Apple devices including Iphones and the Ipod touch. It replaces original part numbers 309631-001, 309631-002, 309631-003, 309631-004, 309631-005. It is supplied with comprehensive instructions to enable you to replace your docking connector. This board is compatible with the Bose SoundDock Series 2 only. Note: It is not necessary to order the overlay. A T8 Torx Screwdriver is required during replacement.

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Sounddock Series II Lightning to 30 pin Converter Cradle Support

Sounddock Series II Lightning to 30 pin Converter Cradle Support

Price: $15.99

In Stock | Allow 10 to 14 Days delivery
This cradle support molding fits the standard Apple 30-pin to Lightning adaptor (MD823ZM/A) . The kit consists of the Invebo Thunder support that fits the SoundDock Series II. The support holds the adaptor in place and protects the dock, the adaptor and most importantly, your Apple devices. Compatible with all Apple hand-held devices with lightning connector. Please note: The cradle is only available in black and is
NOT supplied with a 30-pin to lightning adaptor. These are easily sourced
elsewhere. All Apple and generic charg only adaptors fit in thd cradle.  If you
need  to stream audio via the Lightning connector then you need the genuine Apple version part no MD823AM/A
  • Supplied with 3 silicone pads to suit all Apple devices
  • Compatible with all 20mm high charging converters
  • Fits all SoundDock Original Series I
  • Rugged Polycarbonate plastic
  • 30-pin to Lightning NOT included

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Invebo |  SoundDock Series II


 

invebo bose repair homepageInvebo fix bose sounddockInvebo Bose repairInvebo Bose sounddock boards