Click to find the right part and diagnostics for your dock
24 hr dispatchsecure safe paymentscustomer feedback

Repairs


All Spares


New Products

Innexxis BC25 HD Codec Bluetooth 5.0 Upgrade Kit

Innexxis BC25 HD Codec Bluetooth 5.0 Upgrade Kit

Price: $59.00

SoundDock 10

Invebo |  SoundDock 10

SoundDock 10 High Definition Bluetooth Upgrade aptX, aptX HD, aptX, AAC

SoundDock 10 High Definition Bluetooth Upgrade aptX, aptX HD, aptX, AAC

Experience unparalleled performance from your SoundDock 10 by incorporating the cutting-edge 24-bit Bluetooth codecs. Enhance your audio quality by installing the SD10HD high-definition Bluetooth upgrade into the iPod cradle's plastic housing. This easily to install kit, as demonstrated in the instructional video, ensures the direct delivery of top-notch, lossless digital audio to your dock. By bypassing two unnecessary conversions that occur when using the iPod cradle, this upgrade maximizes sound quality. Finally the SoundDock performs to its full potential.

SD10HD High Definition Bluetooth Upgrade Kit

SD10HD High Definition Bluetooth Upgrade Kit

Price: $49.00

In Stock | Moving Office Shipping resumes 19th June 2024
This kit has been integrated into the iPod dock, specifically the SoundDock 10 iPod adaptor. You can find installation instructions in the Tech Guide section of the site, including a video demonstration. The streaming sound quality surpasses anything you've experienced with your SoundDock 10. This upgrade incorporates the cutting-edge Qualcomm 5.1 Chipset, supporting the latest advanced audio codecs such as aptX, aptX HD, aptX Low Latency, SBC, and AAC. The connection to the dock is entirely digital, delivering the utmost clarity and depth achievable only through a 24-bit 48kHz bitrate.

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



SoundDock 10 High Definition Bluetooth Upgrade Module aptX, aptX HD, aptX, AAC

SoundDock 10 High Definition Bluetooth Upgrade Module aptX, aptX HD, aptX, AAC

Price: $69.00

In Stock | Moving Office Shipping resumes 19th June 2024
This module snaps directly into the cradle holder on the Bose SoundDock 10, offering the only solution that delivers lossless HD audio directly to the dock's digital processor without any intermediate conversions. What does that mean? You get crystal-clear sound with an impressive dynamic range and exceptional clarity. The SoundDock 10 will sound better than ever before. To use it, simply remove the iPod dock module or the 16-bit Bluetooth Module and plug this in its place and you're ready to go!

People who bought this item also bought:
1. SoundDock 10 30 pin to Lightning Converter Cradle Support
2. Free SD10 Power / Amplifier 322642-00X0 diagnostic check / Repair Service

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Bose SoundDock 10 Module Repair Service

When you purchase the repair or a free diagnostic check you will receive an email containing the shipping labels and information to enable you to send your dock's faulty module to our repair centre. Your module will be will be dispatched back to you by airmail within five working days of receipt. All modules are tested upon receipt and if found to be working then the module will be returned and any repair fees paid will be refunded.

ALL RELIABILITY MODIFICATION AND SERVICE BULLETIN UPGRADES WILL BE APPLIED DURING SERVICE

Applies to SoundDock 10 power/amplifier Boards all versions 22642-00xx & 322642-00xx. Module must be complete and original without severe mechanical damage. If a controller turns out to be beyond economical repair for example due to a severe liquid spill then there a refund applies. All repairs have 12 month warranty. Return shipping is charged at checkout.

Free SD10 Power / Amplifier 322642-00X0 diagnostic check / Repair Service

For use with:
Bose Part Number(s) - 322642-0020 & 322642-0020

Free SD10 Power / Amplifier 322642-00X0 diagnostic check / Repair Service

In Stock | Moving Office Shipping resumes 19th June 2024

Service Required

If you do not get the two beeps when you plug the mains power and your iPod is not charging, the Power supply/Amplifier board has failed. If you need a diagnosis then send your SD10 power board to us using the labels we send by email when you order this service. We will run diagnostic tests confirm its state. The diagnostic service is free. If the parts you send are functioning then we send them back to you and there is no additional charge. Shipping labels and instructions are emailed to you when you place the order. ONLY APPLIES TO ALL BOSE SOUNDDOCK 10 Power modules. Please watch and follow the diagnostic video in the Tech Guide section of the site.
More...

People who bought this item also bought:
1. SoundDock 10 High Definition Bluetooth Upgrade Module aptX, aptX HD, aptX, AAC
2. SoundDock 10 30 pin to Lightning Converter Cradle Support

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Cable Flex Flat Bose SoundDock10 part #310376-002 Rev-02

Cable Flex Flat Bose SoundDock10 part #310376-002 Rev-02

Price: $19.50

In Stock | Moving Office Shipping resumes 19th June 2024
This is highh quality equivalent replacement interconnect Flat Ribbon Cable cable for the Bose Sounddock 10 that links the mainlogic boards and the front docking section. Equivalent to Bose part Cable Flex Parlante Bose 310376-002 Rev-02 and 310376-002 Rev-01

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



SoundDock 10 30 pin to Lightning Converter Cradle Support

SoundDock 10 30 pin to Lightning Converter Cradle Support

Price: $17.00

In Stock | Moving Office Shipping resumes 19th June 2024

30-Pin to Ligthning Adaptor Type

This cradle support molding fits the standard Apple 30-pin to Lightning adaptor (MD823ZM/A) . The kit consists of the Invebo Thunder support plus a special adaptor that fits the SoundDock I0. The support holds the adaptor in place and protects the dock, the adaptor and most importantly, your Apple devices. Compatible with all Apple hand-held devices with lightning connector. Please note: The cradle is only available in black and is NOTsupplied with a 30-pin to lightning adaptor . These are easily sourced
elsewhere. All Apple and generic charge only adaptors fit in the cradle.
cradle.    If you want to stream audio via the Lightning connector then you need the genuine Apple version part no MD823AM/A

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Invebo |  SoundDock 10


 

invebo bose repair homepageInvebo fix bose sounddockInvebo Bose repairInvebo Bose sounddock boards