Click to find the right part and diagnostics for your dock
24 hr dispatchsecure safe paymentscustomer feedback

Repairs


All Spares


SoundDock Original

Invebo |  SoundDock Original

innexxis BC7 Bluetooth and Universal Charge Upgrade

innexxis BC7 Bluetooth and Universal Charge Upgrade

Price: $69.95

In Stock | Allow 4 to 8 days delivery

Version

This kit is UNIVERSAL AND FITS ALL SOUNDDOCK ORIGINAL SERIES 1. It gives your dock the ability to to stream music over bluetooth from any Bluetooth enabled smart phone, tablet or PC. The charge upgrade feature is also compatible with all Apple devices that require USB charging (30 pin connector) including the Iphone, Ipod Touch and later generations of Ipod. Click to see feature video of AUX version This is a direct replacement that fits any Bose SoundDock Original Series 1. The upgrade can be completed in about five minutes. The supported foam overlay replaces the sticky overlay and holds the docking board in place. No adhesives are required. Note you also get a new docking connector. Please have your dock serial number ready to enter during checkout. Click here to see installation video
If you need an Aux input Click here to see the simple modification for the front Aux socket
Kit comprises:

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



USB Charge Upgrade and Dock Connector Replacement Kit for SoundDock Original

USB Charge Upgrade and Dock Connector Replacement Kit for SoundDock Original

Price: $49.95

In Stock | Allow 4 to 8 days delivery
If your SoundDock original does not charge your Apple device then this kit will give your dock the features to enable you to play and charge all generations of Apple devices that require USB charging (30-pin docking connector) including the Iphones, Ipod and Touch. PLEASE NOTE: This part is not compatible with Type B Docks. This is a direct replacement for Bose part number #282490-001 & 276993-001 and will enable you to complete the upgrade in about five minutes. SoundDock Original Check & Diagnostic video The supported foam overlay replaces the sticky overlay and holds the docking board in place. Therefore no adhesives are required. Note you also get a new docking connector. Click on the gold bar above to check your dock type. Click to see replacement procedure video
Kit comprises:
  • Docking Board with new dock connector & USB charging support
  • T8 Torx Screwdriver
  • Supported Foam Overlay
  • Instructions.

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



SoundDock Original Dock Connector Type A

SoundDock Original Dock Connector Type A

Price: $42.95

In Stock | Allow 4 to 8 days delivery
This is a direct replacement for Bose part number #282490-001 & 276993-001. Note that for a little more expense this type of dock can be upgraded to charge the Iphone and Ipod touch. Check items for sale under the Upgrade Kits. Click on the gold bar above to check your dock type and receive the resources by email. Refund guaranteed if returned within 14 days.

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



SoundDock Original Dock Connector Type B

SoundDock Original Dock Connector Type B

Price: $42.95

In Stock | Allow 4 to 8 days delivery
This is a direct replacement for Bose part number 314877-001 & 314877-002 & 324206-0010. Note that this type of dock already supports the charging of the Iphone and Ipod touch. If your board has the four resistors then you do not need an upgrade kit! Click on the gold bar above to check your dock type and receive the resources by email. Refund guaranteed if returned within 14 days.

People who bought this item also bought:
1. Dock Opening Tool
2. Supported Foam Overlay

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Lightning to 30-pin Converter Cradle Support Sounddock Original

Lightning to 30-pin Converter Cradle Support Sounddock Original

Price: $16.50

In Stock | Ships Mar 18. (Allow 4 to 14 Days for Delivery)
This cradle support moulding fits the standard Apple 30-pin to Lightening converter (MD823ZM/A) . The kit consists of the invebo Thunder support plus a special adaptor that fits the Sounddock Original Series 1. The support holds the converter in place and protects the dock, the converter and most importantly, your Apple devices. Compatble with all Apple hand-held devices with lightening connector. Please note: The cradle is only avilable in black and is supplied with a generic 30-pin to lightening adaptor that supports charging. If you want to stream audio via USB then you need the genuine Apple version part no MD823ZM

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Cradle Support Upgrade Black

Cradle Support Upgrade Black

Price: $10.00

In Stock | Allow 4 to 8 days delivery
Fits SoundDock Original series 1 only. The Universal Cradle Upgrade supports the docked Apple device and protects the dock connector. When your finger presses on the front of the docked device there is no support behind so it moves backwards causing strain and wear to the docking connector. The docking connector is presented higher increasing penetration improving successful docking of iPhones with a protective case fitted. The upgrade simple to fit. See the video in the technical guide section or in the Video Guides tab below. Kit includes plastic parts, three silicone pads. A dock opening tool is required.

People who bought this item also bought:
1. innexxis BC7 Bluetooth and Universal Charge Upgrade
2. Lightning to 30-pin Converter Cradle Support Sounddock Original

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Cradle Support Upgrade White

Cradle Support Upgrade White

Price: $10.00

In Stock | Allow 4 to 8 days delivery
Fits SoundDock Original series 1 only. The Universal Cradle Upgrade supports the docked Apple device and protects the dock connector. When your finger presses on the front of the docked device there is no support behind so it moves backwards causing strain and wear to the docking connector. The docking connector is presented higher increasing penetration improving successful docking of iPhones with a protective case fitted. The upgrade simple to fit. See the video in the technical guide section or in the Video Guides tab below. Kit includes plastic parts, three silicone pads. A dock opening tool is required.

People who bought this item also bought:
1. innexxis BC7 Bluetooth and Universal Charge Upgrade
2. Needle File (Rear AUX Fitting)

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Dock Opening Tool

Dock Opening Tool

Price: $1.85

In Stock | Allow 4 to 8 days delivery
This is a small Torx screwdriver to fit the screws that hold the docking connector in place. A quality tool. 135mm Long.

People who bought this item also bought:
1. Supported Foam Overlay
2. SoundDock Original Dock Connector Type B

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Auxillary Cable for Rear 3.5mm Aux Socket

Auxillary Cable for Rear 3.5mm Aux Socket

Price: $12.50

In Stock | Allow 4 to 8 days delivery
This lead plugs into the Aux line in socket on the Innexxis BC7 board. The lead is routed out to the rear of the dock under the base cover to give a robust 50mm tail at the rear of the dock. Signals from the Bluetooth stream and docking connector have priority over the Aux cable input. When audio is present on the line in connection the dock powers up and plays automatically. NOTE: This cable is not compatible with BC7 Aux front socket option. (BC7 Aux Features video)

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Needle File (Rear AUX Fitting)

Needle File (Rear AUX Fitting)

Price: $2.15

In Stock | Allow 4 to 8 days delivery
This 2.8mm round-section needle file is to enable you to make the notch in the cover to accomodate the rear AUX cable when upgrading your SoundDock Original to Bluetooth. (See video). Only required when fitting rear AUX socket to the Sounddock Original Series 1.

People who bought this item also bought:
1. innexxis BC7 Bluetooth and Universal Charge Upgrade
2. Cradle Support Upgrade White

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Supported Foam Overlay

Supported Foam Overlay

Price: $1.99

In Stock | Allow 4 to 8 days delivery
The supported foam overlay is gloss on the top side and matt black soft padded-sealed cell foam on the underside. When assembled it protects and supports the docking connector board. It simplifies the replacement procedure because adhesive is not required to carry out the connector repair and if there are any problems the dock can easily be disassembled.

People who bought this item also bought:
1. Dock Opening Tool
2. SoundDock Original Dock Connector Type B

Please wait while the content is loading. [This text will be replaced by the contents of "pop-drg.html"]

Please wait while the content is loading. [This text will be replaced by the contents of "pop-gold.html"]



Invebo |  SoundDock Original


 

invebo bose repair homepageInvebo fix bose sounddockInvebo Bose repairInvebo Bose sounddock boards